|
Choose
from the following operator styles:
Bead Chain Clutch
 Unlike
competitive systems, Draper clutch never needs adjustment
and can be mounted either on the right or left,
as preferred.
Spring-loaded
idler end allows for minor adjustments.
Universal
bracket allows for mounting to wall, ceiling or
jamb and it is interchangeable with 10# or 20# clutches.
Window
shade stops when operating chain is released.
Standard
stainless steel chain hangs at the side, leaving
the view unobstructed.
Optional
plastic chain in ivory, grey or black.
Preset
up and down limit stops prevent shades from being
raised or lowered too far.
Spring
assist is optionally available.
Crank-Operated
Crank-operated
FlexShades offer complete reliability and precise
light control, with minimal effort.
Even
the largest shades operate smoothly.
With
crank control you can easily operate tall shades,
wide shades or even groups of shades from a single
controller.
All
shades can be raised or lowered to exactly the same
height.
Compact
bi-directional gear assembly can be mounted for
either right- or left-hand operation.
Attractive
crank handle hinges form a thin, straight rod at
edge of window when not in use. Nothing obstructs
your view.
Crank
operator can be permanently mounted or detachable,
and through 6' in length.
Optional
heavy-duty crank is available in lengths to 10'.
In public areas a detachable operator prevents unauthorized
persons from operating the shades.
Optional
2-Piece crank handle available for shades 14' or
more above floor.
All
crank-operated shades are furnished with endcaps.
Spring Roller Operation
Traditional
window shade operation. Galvanized, or enameled
steel rollers and heavy-duty springs sized to operate
any shade easily through 12' wide x 12' high.
Dual Roller FlexShade with Fascia option available.
Hardware for FlexShades.
We can print
graphics on your window shade!
 |
|
Use the SpecWizard to select and configure products and then generate a 3-part spec in Word, WP or RTF format. |
|
2008
Motorized FlexShades