Motorized FlexShade 50 DC

Low Voltage Shade with High Voltage Performance—Low Voltage Motor-24 Volt Wiring

The Motorized FlexShade 50 DC offers a low-voltage motor with high voltage performance for wider shade widths. Low-voltage shade motors use 24-volt wiring, consume less electricity, require less wiring by electricians, and provide quieter operation. It is available in 24V RTS and 24V 485 platform technologies. The 24V 485 motor is scalable to fit the project budget and needs for large commercial buildings. A single Sonesse Ultra motor can operate up to six individual shades.
 

Product Specs

  • CHILD SAFETY NOTICE: This product complies with ANSI/WCMA A100.1-2022-Child Safety Standard and has been Certified Best for Kids™ by the Window Covering Safety Council.
  • Available in sizes 36 3/8” to 168” (92 cm to 427 cm) wide, depending on motor and fabric selection.
  • Quiet 24V motor. Low voltage motors use 24-volt wiring. Use low voltage accepted practices for wiring.
  • Available in standard radio frequency or RS485 platform technologies. Large commercial buildings can benefit from the 24V 485 motor’s scalability.
  • Multiple hardware options for surface mounting, including brackets (standard), fascia with endcaps, or headbox with closure.
  • Recess mount hardware includes pocket headbox or Pocket D headbox with tile lip. Where a pocket already exists a wall clip and closure are available with or without a tile lip.
  • Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
  • Compatible with "U", "H", and "L" channels for light-gap reduction.
  • Dual roller hardware components include: Dual Roller Endcaps, Dual Roller Fascia, Dual Roller Ceiling/Wall Headbox, and Dual Roller Pocket Headbox. Options may vary by product type. See technical documents for details.
  • Dual Roller Fascia and Dual Roller Ceiling/Wall Headbox finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
  • Dual Roller Pocket Headbox finish choices: gray inside/white outside or white inside/gray outside with a white wall clip.
  • Choose from a wide range of fabrics in a variety of colors, textures, and opacities to customize any room's décor.
  • Product designed for interior use.

ANSI/WCMA A100.1-2022 Child Safety Standard

Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022 child safety standard, all Draper window shades operated by a bead chain will be furnished with a tensioned hold-down device that is permanently attached and partially disables the product if not installed correctly. This hold-down should be installed with tension on the chain.

All bead chain operated window shades will include:

  • Permanently installed spring-loaded tensioned hold-down device
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using appropriate hardware for the site conditions. Consult with contractors and builders as needed.

If the tension device is not installed with appropriate tension on the bead chain, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain.

Approved permanent warning label

Learn more about the new child safety standard

At the link below, you can see more information about the new child safety standard, mounting methods for the tensioned hold-down device, alternatives to bead chain products, and more.

Click here for more information
Tensioned hold-down device

Part Numbers

Videos

Case Studies

Related Motors & Accessories

Got a question?

We've got answers. Contact us about window shades with the form below and let us know how we can help you deliver on your projects.

Your location:

   

We have automatically detected your location, shown above. If your correct home territory is not shown, please select the correct one so that we may accurately route your question.

What type of installation?

What's your question?

Tell us about yourself.



Your Drape‍r contact information:

Need to contact someone immediately? Your Draper contacts are shown below.

Mitch Photo
Mitch Broome
Regional Sales Manager - Architectural Products, Midwest USA
mitch.broome@draperinc.com
765.856.1245
Logo Photo
Architectural Sales Consultant Team
Contact Info:
commercialshades@draperinc.com
800-238-7999
Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)
Please enter the following characters to help us prevent spam:
nothuman