Product Specs
-
CHILD SAFETY NOTICE: To comply with ANSI/WCMA A100.1-2022, this product ships with a tensioning device attached to the bead chain. Incorrect installation partially disables the product.
-
Available in sizes up to 12' wide x 12' high (366 cm x 366 cm), depending on fabric selection. Optional dual rollers available upon request.
-
Universal mounting brackets and spring-loaded idler end provide ease of installation.
-
Optional white or black universal mounting brackets to match clutch color available.
-
Optional Spring Lift Assist is available for ease-of-operation.
-
Bead chain clutch operator mounted right- (standard) or left-hand operation.
-
Clutch available in white (standard) or black.
-
Stainless steel bead chain (standard). Polyester chain available in white, black, brown, grey, or ivory at no extra charge.
-
Hardware finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
-
Hardware choices include universal brackets, endcaps with fascia, ceiling/wall or pocket style headbox.
-
Small or large hardware options available.
-
Dual roller hardware components include: Dual Roller Endcaps, Dual Roller Fascia, and Dual Roller Pocket Headbox. Options may vary by product type. See technical documents for details.
-
Dual Roller Fascia finish choices: clear anodized (standard), black, white, ivory, or charcoal bronze. Custom powder coat colors available.
-
Dual Roller Pocket Headbox finish choices: gray inside/white outside or white inside/gray outside with a white wall clip.
-
Product designed for interior use.
ANSI/WCMA A100.1-2022 Child Safety Standard
Effective June 1, 2024, in compliance with the updated ANSI/WCMA A100.1-2022
child safety standard, all Draper window shades operated by a bead chain will be
furnished with a tensioned hold-down device that is permanently attached and
partially disables the product if not installed correctly. This hold-down should
be installed with tension on the chain.
All bead chain operated window shades will include:
- Permanently installed spring-loaded tensioned hold-down device
- Approved permanent warning label attached
- Approved mechanical fasteners for the tension device included. Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using
appropriate hardware for the site conditions. Consult with contractors and builders as needed.
If the tension device is not installed with appropriate tension on the bead
chain, the shade will be rendered partially inoperable. If installed
properly, the tension device will prevent the creation of a hazardous loop
and
will maintain tension on the bead chain.
Approved permanent warning label
Learn more about the new child safety standard
At the link below, you can see more information about the new child safety
standard, mounting methods for the tensioned hold-down device, alternatives
to bead chain products, and more.
Click here for more information
Tensioned hold-down device
Supporting Documents
Click the
and
icons to navigate the folders. Click the document name to download.
Part Numbers
Related Motors & Accessories